Installation and Upgrade Guide Owner's manual

Publication 1757-IN040B-EN-P - March 2002
ProcessLogix Client Installation and Upgrade Procedures 5-5
If you are installing ProcessLogix Client to a Clean PC, skip
to Installing ProcessLogix R400.0 Client Software on page 5-18.
Upgrading a ProcessLogix R320.0 Windows NT 4.0 Workstation Client to a
ProcessLogix R400.0 Windows NT 4.0 Workstation Client
The following table lists the items that you must complete to upgrade
a R320.0 Windows NT 4.0 Client to a R400.0 Windows NT 4.0 Client
Pre-work for systems with
ProcessLogix R320.0
Use the procedures outlined in this section to convert an existing
R320.0 Client system to a R400.0 Client system. If you are performing a
Clean installation refer to the tables above for installation procedures.
✔
Step Item Page
1. Saving Important Data 5-6
2. Removing Selected Components 5-7
3. Cleaning Up the Registry 5-9
4. Installing Service Pack 6a for Windows NT 4.0 5-13
5. Installing MDAC 2.5 Service Pack 1 5-14
6. Installing Windows Installer 5-15
7. Installing Internet Explorer 5.5 SP1 5-16
8. Installing Adobe Acrobat Reader 4.05 2-22
9. Updating the ActiveX Support Files 5-17
10. Installing ProcessLogix R400.0 Client Software 5-18
IMPORTANT
Be sure to logon as ps_user. If you don’t have a user
ps_user account, you must create one at this time.
Refer to Creating the ProcessLogix User Accounts on
page 2-26.