Installation and Upgrade Guide Owner's manual

Publication 1757-IN040B-EN-P - March 2002
Additional Redundant Server Procedures 6-11
4. The unsynchronized SERVERA data should be similar to this:
5. Verify that the data link is available.
6. On SERVERB, click
Start⇒Run.
7. Key in this command in the Open entry field:
>cmd<
and click OK to open the DOS window.
8. At the DOS prompt, key in this command:
>dual_status<
and press <Enter>.
9. The unsynchronized SERVERB data should be similar to this:
10. Verify that the data link is available.
Configuring Stations in
Quick Builder (on
SERVERA)
1. Click Start⇒Programs⇒ProcessLogix Server⇒Quick Builder.
2. Click the New Project option and click OK.