Installation and Upgrade Guide Owner's manual

Publication 1757-IN040B-EN-P - March 2002
6-14 Additional Redundant Server Procedures
2. Key in this command in the Open entry field:
>cmd<
and click OK to open the DOS window.
3. At the DOS prompt, key in this command:
>dual_status<
and press <Enter>.
4. The unsynchronized SERVERA data should be similar to this:
5. Verify that the link is active and the databases are synchronized.
6. On SERVERB, click
Start⇒Run.
7. Key in this command in the Open entry field:
>cmd<
and click OK to open the DOS window.
8. At the DOS prompt, key in this command:
>dual_status<
and press <Enter>.