Installation and Upgrade Guide Owner's manual

Publication 1757-IN040B-EN-P - March 2002
6-20 Additional Redundant Server Procedures
6. Click Save.
7. Click Yes to save the new connection.
8. Key in >defaultb.stn< in the File name field and click Save.
9. Highlight defaultb and click Connect.
10. Click Cancel at the Unable to connect prompt, if applicable.
11. Click Station
⇒Connect to call up the Station Connect dialog
box.
12. Highlight Default and click Edit Connection.
13. On the Connection tab, make these entries to have the Station
point to the SERVERA (PLX1A) node:
a. In the Server field, key in or Browse to the Primary Server
name SERVERA.
b. Select the Station type as Static Station.
c. Key in >1< as the Static Station Number and click Advanced.
d. Check the Auxiliary setup file checkbox.