Installation and Upgrade Guide Owner's manual

Publication 1757-IN040B-EN-P - March 2002
ProcessLogix Server Installation Procedures 3-21
Creating an Emergency Repair Disk
After all installations and drivers are installed, you should create an
Emergency Repair Disk.
Use the following procedure to create an emergency repair disk for
your Windows 2000 Server installation.
1. Insert a blank diskette into the PC’s floppy drive.
2. Click Start
⇒Programs⇒Accessories⇒System Tools⇒Backup.
3. Click Emergency Repair Disk.
An Emergency Repair Diskette window appears.
4. Insert a blank diskette into the PC’s floppy drive.
5. Check the Also back up the registry to the repair directory
checkbox and click OK.
6. When finished, click OK.
7. Click Job
⇒Exit.