Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
4-34 ProcessLogix Server Upgrade Procedures
8. Restart SERVERB.
Transferring R400.0 SP2 or R500.1 Data to the R510.0 Server
1. Click Start ⇒ Run .
2. Enter >cmd< and click OK to open the DOS window.
3. If you have a non-redundant server:
a. Enter >xcopy T:\UpgradeData\*.* C:\UpgradeData /E< and
press <Enter>.
b. If necessary, enter >D< to specify that UpgradeData is a
directory.
4. If you have a redundant Server pair,
a. On SERVERA, enter >xcopy T:\UpgradePrimaryData\*.* C:\
UpgradePrimaryData /E< and press <Enter>.
b. If necessary, enter >D< to specify that UpgradeData is a
directory.
c. On SERVERB, enter >xcopy T:\UpgradeBackupData\*.*
C:\UpgradeBackupData /E< and press <Enter>.
d. If necessary, enter >D< to specify that UpgradeData is a
directory.
5. Close the DOS window(s).
Copying R400.0 SP2 or R500.1 Data to the R510.0 Server is complete.
Return to the checklist that led you to this task.