Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Client Installation and Upgrade Procedures 5-23
11. If the system includes Excel Data Exchange, click En a b l e
Macr o s. Otherwise, continue with the next step.
12. At the Setup Complete window, click the No , I w i l l r e s t a r t m y
computer later option and click Fin ish .
If you are installing an Engineering Workstation, wait until after
the command windows have closed and file copying is
complete. This may take a few minutes to complete.
13. At the ProcessLogix Setup Complete window, click the No , I
will restart my computer later option and click Fin ish .
Installing ProcessLogix Update
1. Restart the PC.
2. Logon as ps_user.
3. Insert the ProcessLogix R510.0 Supplemental Software CD into
the CD-ROM drive.
4. Click Star t ⇒ Run .
5. Enter this path or Br ow se to:
>D:(or your CD-ROM drive letter)\SP1\Server-Client\SETUP.EXE<
6. Click OK to launch the software setup application.
7. At the Welcome window, click Ne x t .
8. At the Destination Folder window, click Ne x t .
TIP
If a Microsoft Excel dialog box opens, check the Do
not show this dialog again checkbox and click
OK.
ATTENTION
!
In the next step, ignore the prompt to remove any
disks. The CD must remain in the CD-ROM drive.
You must select No in
Step 12.