Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
8-4 Supplementary Procedures
Removing R500.1 Knowledge Builder
1. Click Start ⇒ Settings ⇒ Control Panel.
2. Double-click Add/Remove Programs.
3. To remove a program:
a. Click on the appropriate program in the list of installed
programs.
b. Click Add/Remove, Chan ge/Remove or Rem o ve.
c. Click Yes to confirm removal.
d. Repeat the steps for each installed component in the
following order
.
Installing Knowledge Builder
1. Insert the ProcessLogix R510.0 Knowledge Builder CD into the
CD-ROM drive.
2. Enter this path or Br ow se to:
>D:(or your CD-ROM drive letter)\Knowledge_Builder\Setup.exe<
3. Click OK to launch the Knowledge Builder setup.
IMPORTANT
Be sure to remove the components, if installed, in
the order they are listed below.
If at any time during software uninstall, a Remove
shared file prompt appears, click Yes to all or
Rem o v e all.
If necessary, click OK or Yes to confirm.
Table 8.C Removing R500.1 Knowledge Builder Components
✔
Step Item
1. KB Server - Knowledge Builder Tools 4
2. KBServer - ProcessLogix R500
3. KB Client
4. Knowledge Builder (At the maintenance window, click Remove and
Next.