Installation and Upgrade Guide

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Upgrade Procedures 4-9
7. Enter >xcopy C:\Honeywell\TPS50\System\ER\Release\*.*
C:\Data\FFdevices /E<
and press <Enter>.
8. If prompted, enter >A< to specify all files and folders.
9. Close the DOS window.
Saving Important R400.0 SP2 or R500.1 Server Data
Each of the following items should be completed on an R400.0 SP2 or
R500.1 Server before proceeding.
IMPORTANT
Redundant ProcessLogix Systems
All steps need to be performed on both the Primary
(SERVERA) and Backup (SERVERB) ProcessLogix
Servers.
If you have a redundant Server pair, you must
complete this procedure on SERVERB first. Then
complete the entire procedure again on SERVERA.
ATTENTION
!
Before saving ProcessLogix data, you MUST exit all
ProcessLogix applications and stop all ProcessLogix
services. You must complete the procedure in
Stopping ProcessLogix Applications and Services on
page 8-1 before continuing.
If you have a redundant Server pair, you must
complete this procedure on SERVERB first. Then
complete the entire procedure again on SERVERA.