Instruction Manual

Rockwell Automation Publication 1769-UM006E-EN-P - July 2013 151
Programming Quick Reference Appendix D
105 Inv Type ToThisCtr Range0to11[9].ConfigFlags ® Range0To11[9].ToThisCounter_0
Range0To11[9].ToThisCounter_1
Range0To11[9].Type
Range0To11[9].Invert
106
107
Range0to11[10].HighLimit Range0to11[10].HighLimit
108
109
Range0to11[10].LowLimit Range0to11[10].LowLimit
110 Out15 Out14 Out13 Out12 Out11 Out10 Out09 Out08 Out07 Out06 Out05 Out04 Out03 Out02 Out01 Out00 Range0to11[10].OutputControl
111
Inv Type ToThisCtr Range0to11[10].ConfigFlags ® Range0To11[10].ToThisCounter_0
Range0To11[10].ToThisCounter_1
Range0To11[10].Type
Range0To11[10].Invert
112
113
Range0to11[11].HighLimit Range0to11[11].HighLimit
114
115
Range0to11[11].LowLimit Range0to11[11].LowLimit
116 Out15 Out14 Out13 Out12 Out11 Out10 Out09 Out08 Out07 Out06 Out05 Out04 Out03 Out02 Out01 Out00 Range0to11[11].OutputControl
117
Inv Type ToThisCtr Range0to11[11].ConfigFlags ® Range0To11[11].ToThisCounter_0
Range0To11[11].ToThisCounter_1
Range0To11[11].Type
Range0To11[11].Invert
(1) Bit 12 is Counter 0; bit 13, Counter 1; bit 14, Counter 2; bit 15, Counter 3. Individual counter reset function = 0: reset enable (default), 1: reset disable. See page 73
(2) The default value for NumberOfCounters is 01 (two counters declared).
(3) The default value for CtrnMaxCount is 2,147,483,647 decimal for counters 0 and 1. The default value is 0 for counters 2 and 3.
(4) The default value for CtrnMinCount is -2,147,483,648 decimal for counters 0 and 1. The default value is 0 for counters 2 and 3.
(5) The default value for CtrnScalar is 1 for counters 0 and 1. The default value is 0 for counters 2 and 3.
(6) The default value for CtrnCyclicRateUpdateTime is 10 for counters 0 and 1. The default value is 0 for counters 2 and 3.
Table 30 - Configuration Array for the 1769-HSC Module
1514131211109876543210Description