Instruction Manual
Table Of Contents
- 1769-UM006E-EN-P, Compact High-speed Counter Module User Manual
- Summary of Changes
- Table of Contents
- Preface
- 1 - Module Overview
- 2 - Module Operation
- 3 - Installation and Wiring
- 4 - Module Configuration, Output, and Input Data
- Configure the Module
- Configuration Array
- General Configuration Bits
- Filter Selection
- Program Mode and Program State Run
- Output Program Value (Out0ProgramValue through Out3ProgramValue)
- Output Fault Mode and Output Fault State Run
- Output Fault Value (Out0FaultValue through Out3FaultValue)
- Counter Maximum Count (CtrnMaxCount)
- Counter Minimum Count (CtrnMinCount)
- Counter Preset (CtrnPreset)
- Counter Hysteresis (CtrnHysteresis)
- Counter Scalar (CtrnScalar)
- Cyclic Rate Update Time (CtrnCyclicRateUpdateTime)
- Configuration Flags
- Range High Limit (Range0To11[n].HighLimit) and Range Low Limit (Range0To11[n].LowLimit)
- Range Output Control (Range0To11[n].OutputControl)
- Range Configuration Flags
- Output Array
- Output on Mask (OutputOnMask.0 through OutputOnMask.15)
- Output Off Mask (OutputOffMask.0 through OutputOffMask.15)
- Range Enable (RangeEn.0 through RangeEn.15)
- RBF - Reset Blown Fuse (ResetBlownFuse)
- Control Bits
- Range High Limit or Direct Write Value (Range12To15[n].HiLimOrDirWr)
- Range Low Limit (Range12To15[n].LowLimit)
- Range Output Control (Range12To15[n].OutputControl)
- Range Configuration Flags (12To15)
- Input Array
- Input State (InputStateA0 through InputStateZ1)
- Readback (Readback.0 through Readback.15)
- Status Flags
- Range Active (RangeActive.0 through RangeActive.15)
- Current Count (Ctr[n].CurrentCount)
- Stored Count (Ctr[n].StoredCount)
- Current Rate (Ctr[0].CurrentRate to Ctr[3].CurrentRate)
- Pulse Interval (Ctr[0].PulseInterval and Ctr[1].PulseInterval)
- Status Flags
- 5 - Diagnostics and Troubleshooting
- A - Specifications
- B - Program a 1769-HSC Module, CompactLogix Controller, and 845F Incremental Encoder with RSLogix 5000 Software
- C - Program a 1769-HSC Module, MicroLogix 1500 Controller, and 845F Incremental Encoder with RSLogix 500 Software
- D - Programming Quick Reference
- E - History of Changes
- Glossary
- Index
- Back Cover
Rockwell Automation Publication 1769-UM006E-EN-P - July 2013 9
Preface
Use this manual if you are responsible for designing, installing, programming, or
troubleshooting control systems that use Compact I/O and/or MicroLogix 1500
or CompactLogix controllers.
Packaged Controller
Functionality
Both the 1769-L24ER-QBFC1B and 1769-L27ERM-QBFC1B packaged
controllers provide the same high-speed counter (HSC) functionality as the
1769-HSC except for the input frequency.
While many features of the 1769-HSC module are available with the embedded
high-speed counters, some of the features of the 1769-HSC module are not
available with the embedded high-speed counters of the CompactLogix packaged
controllers. Features not available on the embedded high-speed counters include
rate/timer functions and limited output range control (4 ranges instead of the 16
available with the 1769-HSC module). Specific differences between the
1769-HSC module and the packaged controller functionality are noted
throughout this manual.
The CompactLogix Packaged Controllers Quick Start and User Manual,
publication
IASIMP-QS010, provides wiring diagrams, configuration
procedures, and tag descriptions for the embedded high-speed counters.
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/
literature/. To order paper copies of technical documentation, contact your local
Allen-Bradley distributor or Rockwell Automation sales representative.
Resource Description
CompactLogix System User Manual,
publication 1769-UM007
Describes how to install, use, and program
your CompactLogix controller.
Compact I/O 1769-ADN DeviceNet Adapter User
Manual, publication 1769-UM001
Describes how to install, and use the
1769-ADN DeviceNet adapter.
Compact I/O Selection Guide, publication
1769-SG002 Describes the 1769 Compact I/O modules.
CompactLogix Packaged Controllers Quick Start and
User Manual, publication
IASIMP-QS010
Provides a quick start and information on
how to install, use, and program your
CompactLogix packaged controller.
MicroLogix 1500 Programmable Controllers User
Manual, publication
1764-UM001
Describes how to install, use, and program
your MicroLogix 1500 controller.
MicroLogix Programmable Controllers Family Selection
Guide, publication 1761-SG001
Provides an overview of the MicroLogix
1500 system.
Industrial Automation Wiring and Grounding
Guidelines, publication
1770-4.1
Provides general guidelines for installing a
Rockwell Automation industrial system.
Product Certifications website,
http://www.ab.com Provides declarations of conformity,
certificates, and other certification details.