Manual

Compact High-density Analog Current Input Module 9
Publication 1769-IN085A-EN-P - August 2008
Mounting Expansion I/O
Minimum Spacing
Maintain spacing from enclosure walls, wireways, or adjacent equipment. Allow
50 mm (2 in.) of space on all sides for adequate ventilation, as shown.
Mount the Module to a Panel
Mount the module to a panel using two screws per module. Use M4 or #8 panhead
screws. Mounting screws are required on every module.
ATTENTION
During panel or DIN rail mounting of all devices, be sure that all debris,
that is, metal chips or wire strands, is kept from falling into the module.
Debris that falls into the module could cause damage when cycling
power.
Controller
Bottom
Side Side
Top
Compact I/O Compact I/O Compact I/O Compact I/O
End Cap
Compact I/O