Owner manual

Chapter 2
Installing The Smart Transmitter Toolkit
2-4
A. Start at the Program Directory and press these keys:
F10
F8
Advanced Edit
Edit
Program
Directory
F8
Monitor
File
F8
Paste From Disk
You see:
B. Use the cursor keys to highlight the STT100 file.
C. To begin the paste, press
F1 Begin Paste .
The paste operation takes about 3 minutes. Since the STT subroutine
uses indirect addressing, you may hear beeps during the paste
operation. This is normal.
D. To return to the Program Directory, press Esc Esc .
3. Paste The STT
Subroutine File