User Manual Owner manual

Index
I–3
link type field, 47
local mode, 41, 42
M
main menu, 32
manual overview, P1
maximum cable length, 27, 29, 212
maximum token holder, 38
maximum token holder address, B6
modem, 12, 28, 39
cabling considerations, 212
modes of operation, 31
configuration mode, 31
run mode, 31
module, 11
multipoint configuration, 25
multidrop addresses, 46
N
new stations, 38
node address, 42, 43
number of retries, 38
numeric displays, 52
P
packet formats, 46
link information, 48
slave, 47
parameter number, 35
parity, A1
PCCC CMD byte, 46, 47
physical specifications, A2
pinouts, 22, 28
PLC command sets, 41
pointtopoint configuration, 24
pointtopoint link, 22
power consumption, A1
power cord, 213, 214
power indicator (LED), 51
power select switch, 213
protocol, 12, 28
publications, P1
push buttons, 31, 32
operation, 32
R
read link parameters, B6
command format, B6
reply format, B6
receive data (RXD), 28
related products, P1
remote mode, 39, 41, 43
addressing, 45
replacing fuses, 214
reply format
diagnostic counter reset, B5
diagnostic loop, B1
diagnostic read, B2
diagnostic status, B4
read link parameters, B6
set link parameters, B6
SRD request, 49
request to send (RTS), 28
RS232C, 11, 21, 41
activity indicator (LED), 310, 51, 53
baud rate, 36
cabling considerations, 28
connector pinouts, 28
specifications, A1
RS232C parity, 36
RS232C/DF1, 12
RTS, 28
run mode, 31, 37
RXD, 28
S
save and exit, 33
series and revision, 36
set link parameters, B6
command format, B6
reply format, B6
shield ground, 24
signal ground (GND), 28
slave addresses, 43
slave devices, 41
slave packet formats, 47
slave protocol, 41
SLC 500, P1, 22, 41, 46
source address, 41, 43
SRD messages, 46
SRD request packet format, 47
station address, 42, 43