User Manual PLC-3 FAMILY I/0 Instruction Manual

Preface
P- 2
In this manual, we assume that you know how to program and operate an
Allen-Bradley PLC-3 or PLC-3/10

programmable controller system. If
you are not familiar with these controllers, refer to the following
publications:
Publication Title
17706.2.2 Data Highway Cable and Data Highway Plus Installation Manual
17706.5.15 PLC3 Industrial Terminal (cat. no. 1770T4) User's Manual
17706.5.16 Data Highway/Data Highway Plus Protocol Command Set User's Manual
17716.5.83 Remote I/O Adapter Module (cat. no. 1771ASB) User's Manual
17756.3.1 PLC3 Backup Concepts Manual
17756.4.1 PLC3 Family Programming Manual
17756.7.1 PLC3 Family Installation and Operation Manual
17846.5.1 Industrial Terminal (cat. no. 1784T50) User's Manual
62006.5.3 PLC3 Programming Software User's Manual
We refer to certain types of equipment and terms throughout this manual.
To make the manual easier for you to read and understand, we avoid
repeating full product names where possible.
We refer to the: As the:
I/O ScannerCommunication Adapter Module
(cat. no. 1775S5, SR5)
scanner
PLC3 or PLC3/10 programmable controller system controller or the system
ladderdiagram or user program that controls
PLC3 processor operation
ladder program
Data Highway link DH link
Data Highway Plus link DH+ link
Industrial terminal system, e.g., AllenBradley 1784T4, T47,
T53, or 6160T60 terminals, or an computer with 6200 software
programming terminal
Audience
Vocabulary