User manual

A-2 Run the 1784-KTx Card Diagnostics for Windows NT
1784-6.5.22 - November 1999
Install the Diagnostics
Be aware of the following important points before installing the Windows
NT diagnostics for 1784-
KTx card.
Important: Before you can install the diagnostics for the 1784-KTx card, you
must be logged in as an administrator of the machine or have
administrator privileges. Being an administrator gives you
permission to install or make changes to the machine software. If
you try to install the driver without being an administrator, you will
get error messages and the diagnostics will not install.
• We recommend running Windows NT 4.0 with Service Pack 3 or later, but it
is not required.
Follow the procedure below to install the 1784-KTx diagnostics
for Windows NT.
1. Start the install process with your machine off.
2. Install the 1784-KTx card into your computer by following the card
installation instructions in Chapter 3.