Installation Instrucitons Owner manual

Publication 1784-IN042A-EN-P - April 2005
Chapter 2
Install the 1784-PKTCS Card
Before You Begin
To install the card, you need to:
• a
ccess the computer’s expansion slots
• insert the card into the computer
For Information On This Topic Refer To Page
Before You Begin 2-1
Access the Computer’s PCI Local Bus Expansion Slots 2-2
Insert the Card into the Computer 2-2
Connect to the Network 2-3
Connect the Card Directly to the ControlNet Network 2-5
Connect to a Device on the ControlNet Network
2-6
IMPORTANT
The card’s dimensions are shown below.
4.2 in.
10.7 cm
6.5 in.
16.5 cm
31474-M