Installation Instrucitons Owner manual

Install the 1784-PKTCS Card 2-7
Publication 1784-IN042A-EN-P - April 2005
When you use the RJ-45 connector, you can connect the card to a ControlNet network
without a tap through the Network Access Port (or NAP) of a programmable controller, I/O
adapter, or other ControlNet compliant devices (Figure 2.4 and Figure 2.5).
Table 2.2 Wiring for 1786-CP connector cable
Connector 2
Wire Number Signal Mnemonic Signal Name
1 ISO-GND Isolated Ground
2 N.C. No Connection
3 PTRX-H Receive Data High
4 PTRX-L Receive Data Low
5 PTTX-L Transmit Data Low
6 PTTX-H Transmit Data High
7 N.C. No Connection
8 ISO-GND Isolated Ground