Installation Instrucitons Owner manual

Once You Have Completed the Installation 5-3
Publication 1784-IN042A-EN-P - April 2005
4. You see the Port Configuration screen.
5. Clo
se the IOLinx configuration application.
Configure a Virtual Backplane Driver in RSLinx Software
1. Open RSLinx software.
2. Select Communications ⇒Configure Drivers...
3. On the C
onfigure Drivers menu, select Virtual Backplane (SoftLogix 58xx)’ from
the Available Driver Types menu.
4. Cli
ck on Add New.
5. Ent
er a name for the driver and click on OK.
6. Cli
ck on Close.
The Virtual Backplane driver is now available to use.
In This Field Do This
ControlNet Address select an unused ControlNet address from the pull-down menu
IOLinx Port Number select an unused IOLinx port number from the pull-down menu
Slot Number select an unused virtual backplane slot address from the pull-down menu
(note that this is not the physical PCI slot in which the card is inserted)
Disable Device uncheck the checkbox