Installation Instrucitons Owner manual

Windows 2000, NT, and XP are trademarks of Microsoft Corporation.
RSLogix5000, RSNetWorx, RSLinx, and IOLinx are trademarks of Rockwell Automation.
WARNING
If you connect or disconnect the communications cable with power applied to
this module or any device on the network, an electrical arc can occur. This
could cause an explosion in hazardous location installations.
When used in a Class I, Division 2, hazardous location, this equipment must be
mou
nted in a suitable enclosure with proper wiring method that complies with
the governing electrical codes.
If you insert or remove the card while host power is on, an electrical arc can
occu
r. This could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before proceeding.