Installation Instrucitons Owner manual

Publication 1784-IN042A-EN-P - April 2005

Chapter

Use IOView to Verify the Configuration

Included with the IOLinx for 1784-PKTCS driver CD is a stand-alone test application (called

IOView.exe) that lets you diagnose simple problems over the network before the control

application is available for integration.

In addition, you can use the test application to make certain that the 1784-PKTCS card has

been

correctly installed and is functioning in the PC.

Before You Begin

Before you begin, you must have done the following:

• Ins

talled the card

• Connected it to the ControlNet network, and

• Used RSNetWorx for ControlNet to load a scan list into the card

For Information On This Topic Refer To Page

Before You Begin 6-11

Start IOView 6-12

Create a View 6-12

Read Inputs and Write Outputs 6-14

Change the View State 6-16

Delete a View 6-16