Installation Instrucitons Owner manual

6-14 Use IOView to Verify the Configuration
Publication 1784-IN042A-EN-P - April 2005
Read Inputs and Write Outputs
The input data (if any) and output data (if any) associated with the view are displayed in the
Input Data and Output Data sections, respectively.
Change the Read/Write Period
The data transfer between IOView and the card occurs at the Read/Write Period. You can
change this period by moving the Read/Write Period slider.
Change Output Data
You can change output data for Read/Write views by doing one of the following:
• ma
nually entering values into the Output Data section
• selecting a pre-determined output pattern
Move the
Read/Write period
slider to change
the read/write
period.