User Manual User guide

Rockwell Automation Publication 193-UM012B-EN-P - June 2011 59
Chapter 5
4. Enter the information into the email notification fields as described below.
5. Select the specific fault and warning notifications to send to the email
recipient. These can be changed after the initial configuration.
6. Click "Apply Changes" to save the configuration.
Configure Device Identity
The Device Identity properties populate the notification email subject and body.
To configure the Device Identity, perform these steps:
Email Recipient The email address of the person who will receive the notifications.
Email Sender The email address from which the notification will be sent.
SMTP Server The SMTP server address. Ask your network administration what address
to use.
SMTP Username The username for the SMTP server. Ask your network administration what
username to use.
SMTP Password The password for the SMTP server. Ask your network administration what
password to use.
SMTP Port The SMTP Server Port. Ask your network administration what port number
to use (Port 25 is a common SMTP port).