User Manual User guide

Rockwell Automation Publication 193-UM012B-EN-P - June 2011 65
Chapter 6
Advanced Setup Group
Trip Status Parameter No. 3
This parameter provides trip identification.
1 = Trip
0 = No Trip
Bit 0: Overload — Tag Name: Trip_Status: Overload
Bit 1: Phase Loss — Tag Name: Trip_Status: Phase_Loss
Bit 2: Jam — Tag Name: Trip_Status: Jam
Access Rule Get
Data Type WORD
Units —
Min. Value 0x0000
Max. Value 0x0007
Default Value 0x0000
Warning Status Parameter
No.
4
This parameter provides warning identification
1 = Warning
0 = No Warning
Bit 0: Overload — Tag Name: Warning_Status: Overload
Bit 2: Jam — Tag Name: Warning_Status: Jam
Bit 3: Underload — Tag Name: Warning_Status: Underload
Bit 5: Comm Fault — Tag Name: Warning_Status: Comm_Fault
Bit 6: Comm Idle — Tag Name: Warning_Status: Comm_Idle
Bit 7: Non Vol Mem Fault — Tag Name: NV_Mem_Fault
Access Rule Get
Data Type WORD
Units —
Min. Value 0x0000
Max. Value 0x00FF
Default Value 0x0000
Device Status Parameter
No.
10
This parameter provides status information related to the E1 Plus
Overload Relay and the SMM.
1 = On or Present
0 = Off or Not Present
Bit 0: Trip — Tag Name: Device_Status: Trip
Bit 1: Warning — Tag Name: Device_Status: Warning
Bit 2: Output A — Tag Name: Device_Status: Out_A
Bit 3: Input #1 — Tag Name: Device_Status: In_1
Bit 4: Input #2 — Tag Name: Device_Status: In_2
Bit 5: Motor Current — Tag Name: Device_Status: Motor_Current
Access Rule Get
Data Type WORD
Units —
Min. Value 0x0000
Max. Value 0x003F
Default
Value
0x0000
Trip Enable Parameter No. 12
This parameter allows the installer to enable or
disable the Jam Trip function
1 = Enabled
0 = Disabled
Bit 2: Jam— Tag Name: Trip_Enable: Jam
Access Rule Get/Set
Data Type WORD
Units —
Min. Value 0x0000
Max. Value 0x0007
Default Value 0x0000