Manual

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 77
Frame 10 Mechanical Installation Chapter 6
Remove the Airflow Plate
The drive is equipped with a plate, located near the top of the drive enclosure
(just above the control frame, if installed), that directs air flow through the drive.
You may need to remove this plate in order to access the protective covers and the
power terminals. If you do not need to remove the airflow plate, continue with
Remove the Protective Covers on page 78
.
Task Description
Remove the T8 Torx-head screws that secure the airflow plate to the drive.
Slide the airflow plate off of the drive.
A
B
A
B
A