User manual

3-4 Configuring the WIM
22-COMM-E adapter). Also choose “Remote” when you intend to
operate the WIM in RTU Master mode. See Appendix D
for
details. If you select “Remote,” disregard Steps 5 through 9 and
instead, go directly to Step 10 on Page 3-6 and perform sub-steps
A through H.
Figure 3.4 Local Connection Screen
5. Enter a name and tap Next ->. The “Connection Summary” screen
(Figure 3.5) appears.
Figure 3.5 Connection Summary Screen
6. You can save the connection information and connect immediately,
or save the connection for connecting later.
After making a selection, the “Location for saved connection” screen
(Figure 3.6
) appears, enabling you to navigate to a desired location
on the Pocket PC to store connections.