User Manual FRN 6.xx Manual

Summary of Changes
The information below summarizes changes made for the June 2013
PowerFlex 4 User Manual, Publication 22A-UM001J-EN-E.
The information below summarizes changes made for the September
2010 PowerFlex 4 User Manual, Publication 22A-UM001I-EN-E.
The information below summarizes changes made for the July 2010
PowerFlex 4 User Manual, Publication 22A-UM001H-EN-E.
The information below summarizes changes made for the March 2007
PowerFlex 4 User Manual, Publication 22A-UM001G-EN-E.
The information below summarizes changes made for the September
2005 PowerFlex 4 User Manual, Publication 22A-UM001F-EN-E.
Description of New or Updated Information See Page(s)
Minimum Enclosure Volume column and new footnotes added. 1-7
, A-2
Drive, Fuse & Circuit Breaker Ratings topic updated. A-1
Electronic Motor Overload Protection description updated. A-3
Description of New or Updated Information See Page(s)
Parameters A117 [Bus Reg Mode] and A118 [Comm Write Mode] added. 3-13
Description of New or Updated Information See Page(s)
Start and Speed Reference Control
1-18
Description of New or Updated Information See Page(s)
Minimum Mounting Clearances clarified. 1-2
Footnote (2) on Bulletin 140M catalog edited. 1-7
Graphic for Analog Input, PTC wiring example corrected. 1-14
Stop Drive icon and related warning text removed for parameter
A110 [Anlg In 0-10V Lo].
3-25
New information on reading register address 8192 added. C-3
New information on reading register address 8193 added. C-4
Description of New or Updated Information See Page(s)
Attention statement clarified. 1-3
240V AC – 3-Phase 3.7 kW (5.0 Hp) drive fuse rating revised to 30 amps. 1-7, A-2
Analog Input, PTC wiring example added. 1-14
Attention statement added to Multiple Digital Input Connections wiring
example.
1-17
Parameter P043 [Motor OL Ret] added. 3-12