User guide

Publication 2706-6.4
2-4 Installation and Startup
Hazardous Location
Installations
RS-232 Connections
Use the RS-232 port to connect the DL5 Slave to:
• DL40 Plus Master
• PanelView Printer Port
• 1771 or 1746-DB BASIC Module
• RS-485/RS-232 Black Box Converter (Model# LD-485A-MD)
• PLC-5 Channel 0
• SLC Channel 0
• Personal Computer (RS-232 serial port)
The following figure shows the location and terminal definitions for the
RS-232 port.
!
ATTENTION: THIS EQUIPMENT IS SUITABLE
FOR USE IN CLASS I, DIVISION 2, GROUPS A, B,
C AND D, OR NON-HAZARDOUS LOCATIONS
ONLY.
!
ATTENTION: EXPLOSION HAZARD -
SUBSTITUTION OF COMPONENTS MAY IMPAIR
SUITABILITY FOR CLASS 1, DIVISION 2.
!
ATTENTION: EXPLOSION HAZARD - DO NOT
CONNECT OR DISCONNECT EQUIPMENT
UNLESS POWER HAS BEEN SWITCHED OFF OR
THE AREA IS KNOWN TO BE NON-HAZARDOUS.
Pin # Function
1
2
3
4
5
6
7
8
9
TXD
RXD
Signal Common
No Connection
12
3
4
5
6789
No Connection
DSR
RTS
CTS
No Connection
DL5 Slave