User Manual Manual
Table Of Contents
- 2706-UM017C-EN-P InView Communications User Manual
- Summary of Changes
- Table of Contents
- 1 - Introduction to InView Connectivity
- 2 - Install InView Communication Modules
- Mount Module to 2706-P42, 2706-P43 and 2706-P44 Displays
- Wire Communication Module to InView Display 2706-P42, 2706-P43, 2706-P44
- Mount Communication Kit to 2706-P72, 2706-P74, 2706-P92 and 2706-P94 Displays
- Wire Communication Kit to 2706-P72, 2706-P74, 2706-P92 and 2706-P94 Displays
- Use Communication Module with a 2706-P22R Display
- 3 - InView Communication Module Connections
- 4 - Application Guide
- ControlNet Communication and Tag Setup Screens
- DeviceNet Communication and Tag Setup Screens
- Data Highway Plus (DH+) Communication and Tag Setup Screens
- DH485 Communication and Tag Setup Screens
- EtherNet Communication and Tag Setup Screens
- RIO Communication and Tag Setup Screens
- Save or Download an Application File
- 5 - InView Communication Module Troubleshooting
- A - InView Communication Module Specifications
- Index
- Back Cover
Publication 2706-UM017C-EN-P - March 2006
1-4 Introduction to InView Connectivity
your existing office network to communicate information to the entire
factory.
See publication 2706-IN008, for information on installing and setting
up Ethernet TCP/IP.
Serial RS-232 Communications
PC based RS-232 connection to communicate to an InView display.
This is done via the InView messaging software, Instant Messenger, or
the ActiveX control in RSView32 software. This is effective for a single
display located 15.24 m (50 ft) from the PC or when downloading
message applications.
PC
EtherNet TCP/IP
InView Display
TCP/IP Module
2706-PENET1
PC
RS-232
InView Display