User Manual

15 Publication 2711P-UM002B-EN-P - March 2007

Chapter

Configuring KEPServer Drivers for Modbus

Objectives

This chapter shows how to use KEPServer Enterprise software to

configure KEPServer drivers for Modbus protocols including Ethernet

TCP/IP, RTU Serial, Unsolicited Serial, and ASCII Serial. You will:

• create a project (.pfe) for the drivers

• set the project file as the default project

For each Modbus driver in your project file, you will:

• add a channel

• add a device (or controller)

• create tags

Create a Project File

The first thing you need to do is create a project file.

1. Double-click the KEPServer Enterprise icon in the Systray to

open the default project window below.