User Manual Owner's manual

278 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012
Appendix B CIP Information
connection when it becomes the first EtherNet/IP Class 3 explicit connection to
send a “set” service to one of the following:
• The “value” attribute of any DOP instance (class code 0x09).
• The “data” attribute of any output (consumed) Assembly instance (class
code 0x04).
• Attribute 3 or 4 of the Control Supervisor Object (class code 0x29).
EDS Files
Most of the information contained in the EDS (Electronic Data Sheet) files for
the ArmorStart EtherNet/IP product line will be able to be extracted via the
network.
CIP Object Requirements
The following CIP objects will be covered in the following subsections.
For convenience, all objects that are accessible via the EtherNet/IP port
are included.
Class Object
0x0001 Identity Object
0x0004 Assembly Object
0x0006 Connection Manager Object
0x0008 Discrete Input Point Object
0x0009 Discrete Output Point Object
0x000F Parameter Object
0x0010 Parameter Group Object
0x001D Discrete Input Group Object
0x001E Discrete Output Group Object
0x0029 Control Supervisor Object
0x002C Overload Object
0x0047 Device Level Ring Object
0x0048 QoS Object
0x0097 DPI Fault Object
0x0098 DPI Alarm Object
0x00B4 Interface Object
0x00F5 TCP/IP Interface Object
0x00F6 Ethernet Link Object