Manual

Editing Programs On Line
Chapter 5
5-2
This section provides information on how to select a part program for
editing. You can only edit part programs on line that you have stored in
control memory. If a part program is on tape or another storage device and
you must edit it on line, copy this program to memory as described in
chapter 9.
Important: You can edit programs that are selected as active for
execution. Edit operations being performed on an active program must be
exited before that program can actually be executed in automatic mode.
If an: is displayed to the left of thepart program
name, it means thatthe program iscurrently:
A active
E open for editing
AE active and open for editing
To begin an edit operation on an active or inactive part program:
1. Press the {PRGRAM MANAGE} softkey. The program directory screen
appears (see Figure 5.1).
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
5.1
Selecting the Program To
Edit