Manual

Introduction to Programming
Chapter 10
1
0
-
1
9
Table 10.B
Word Formats and Descriptions
Address Valid
Range
inch
Valid
Range
metric
Function
A 8.6
3.3
8.5
3.3
Rotary axisabout X (AMP assigned)
Angle in QuickPath Plus programming
B 3.0 3.0 Second miscellaneous function(AMP assigned)
C 8.6
8.6
8.5
8.5
Rotary axisabout Z (AMPassigned)
Chamfer lengthin QuickPathPlus programming
D 8.6 8.5 Fixedcycle parameter
E 2.6 3.7 Thread lead
F 8.6 8.5 Feedrate function (F-word)
G 2.1 2.1 Preparatory function(G-code)
I 8.6
8.6
8.6
8.6
8.5
8.5
8.5
8.5
X arccenter in circularinterpolation
X leadin helicalinterpolation
Parameter infixed cycles(AMP assigned)
Exit move vector in cutter compensation
J 8.6
8.6
8.5
8.5
Parameter infixed cycles(AMP assigned)
Exit move vector in cutter compensation
K 8.6
8.6
8.6
8.5
8.5
8.5
Z arc center in circular interpolation
Parameter infixed cycles(AMP assigned)
Exit move vector in cutter compensation
L 3.0 3.0 Number of repetitions
M 3.0 3.0 Miscellaneousfunction
N 5.0 5.0 Sequencenumber
O 5.0 5.0 Program name
P 5.0
5.3
5.0
5.3
Subprogram name
Length of dwell in G04and fixedcycles
Q 8.6 8.5 Parameter in fixedcycles
R 8.6
8.6
8.6
8.5
8.5
8.5
Arc radius
Return point in fixed cycles
QuickPath Plus radius designation
S 5.3
3.3
4.3
5.3
3.3
3.3
Spindle rpm function
Spindle Orient
CSS
T 6.0 6.0 Tool selection function
U 8.6
5.3
8.5
5.3
Incremental axisname (LatheA only)
Length of dwell in G04and fixedcycles
V 8.6 8.5 Incremental axis name(Lathe Aonly)
W 8.6 8.5 Incremental axisname (LatheA only)
X 8.6
5.3
8.5
5.3
Main axis (AMP assigned)
Length of dwell in G04
Z 8.6 8.5 Main axis (AMPassigned)