Manual

Basic Control Operation
Chapter 2
2
-
2
8
Table 2.E (continued)
Password Protectable Functions
Parameter Name: Function becomes accessible when parameter name isin reverse video:
8) OFFSETS · {WORK CO-ORD} —Display andalter the preset workcoordinate systemzero locations and the
fixture offset value.
· {TOOL WEAR} Display andalter the tool wear amount tables forthe different tools.
· {TOOL GEOMET} — Display andalter thetool geometry tables.
· {ACTIVE OFFSET} — Change the currently activeoffset numberwithout requiring the
programming of a different offset number.
· {TOOL MANAGE} — Alter thetool lifeindicators and other machine specifictool functions.
· {RANDOM TOOL} — Allowthe useof the randomtool tablesused tokeep trackof different toolsin
different toolpocket (see chapter 20).
· {COORD ROTATE} — Rotateall of the work coordinate systemsfrom themachine coordinate
system.
· {BACKUP OFFSET} — Make a copy of thecurrent tool offset data.
9) TOOL WEAR {TOOL WEAR} — Displayand alterthe tool wear amount table for the different tools.
10) TOOL GEOMETRY {TOOL GEOMET} —Display andalter the toolgeometry table.
11) ACTIVE OFFSET {ACTIVE OFFSET} — Change the currently activeoffset numberwithout requiring the programming
of a different offset number.
12) BACKUP OFFSET {BACKUP OFFSET} — Make a copy of thecurrent tool offset data.
13) QUICK CHECK {QUICK CHECK} —Use thesyntax andformat checker or the {QUICK CHECK} withgraphics
function.
14) SYSTEM SUPORT · {PRGRAM PARAM} —Display andchange thetables for programmablezones 1and 2, the
single-digit feedrates, and the fixed-cycle operating parameters.
· {AMP} — Changeany of theonline AMPfeatures.
· {DEVICE SETUP} — Displayand changeany of thecommunication parametersfor the peripheral
devices.
· {MONI-TOR} —Display thecurrent I/O configurationsand theaxis monitor for followingerror,
distance to marker, etc.
15) PRGRAM
PARAMETERS
{PRGRAM PARAM} — Displayand changethe tablesfor programmable zones1 and2, the single-digit
feedrates, and the fixed-cycle operating parameters.
16) ONLINE AMP {AMP} —Display andchange theonline adjustablemachine parameters.
17) PARAMACRO
PARAM
{MACRO PARAM} — Displayor change any of the valuesin the paramacro tables without using
programming commands.
18) ACCESS CONTROL {ACCESS CONTRL} —Assign different functions to different access levels, changethe current
password, or viewthe functionsassigned tothe different access levels.
19) SWITCHLANGUAGE {SWITCH LANG.} — Changethe current displaysfrom one languageto another.
20) POWER-UP LEVEL WhenPOWER-UP LEVELis shownin reversevideo, it indicates that if power isturned off when thislevel
is active, thislevel automaticallybecomes activewhen power isturned backon. If this is not inreverse
video, it indicates that thecontrol defaultsto level8 accesscontrol at next power-up.
21) TIME PARTS · {SET TIME} —Change orreset time parameters
· {SET DATE} —Change orreset data parameters
When TIME PARTSis not inreverse video, theoperator can onlyperform thefollowing functionson the
time and parts screen: RUN TIME, CYCLETIME, and LOTSIZE.