QUICK START CONTROLNET MESSAGE Manual

ControlNet Message/Traffic Generator Tool 11
Publication 9220-10.1 — July 1996
3. Open a connection.
From Connections, choose Open Connection and then choose the type
of connection you want to open.
Connections and connection parameters (e.g., Expected Packet
Rate and Connection Size) are defined in CNXOR.CFG.
The connections ar e used to open defined objects and instances
for the target node. You can edit this file as necessary for
your application.
A.
CBT = cyclic block transfer
BT = block transfer
B.
C.
4. Send the message to the target node.
To Choose
As shown on
page 12, in
send a message Connected, Send Message

send and monitor a message Connected, Send/Monitor Messg.

monitor the connection Connected, Monitor Connection

"