QUICK START CONTROLNET MESSAGE Manual

ControlNet Message/Traffic Generator Tool34

Publication

9220-10.1 — July 1996

/*****************************************************************\

** Name: MG_SendUnconnectedMsg ( )

** Description:

** This function sends an unconnected ASA message from the

** configuration file.

** Inputs: USINT *message – Message to be sent.

** Outputs: UINT status – SUCCESS

\*****************************************************************/

/*****************************************************************\

** Name: MG_ReceiveUnconnected ( )

** Description:

** This function receives an unconnected ASA message from the UCMM.

** Inputs: USINT *message – Pointer to where to put the

** received message.

** UINT *dataSize – Size, in bytes, of the

** message received.

** Outputs: UINT status – SUCCESS if message received

** – FAILURE if no message received

\*****************************************************************/

/*****************************************************************\

** Name: MG_SendConnected ( )

** Description:

** This function sends a user provided message on a Connection

** previously opened with a call to MG_OpenConnection.

** Inputs UINT connIndex – Connection index that was returned

** by the MG_OpenConnection function.

** USINT *message – Message to be sent.

** UINT dataSize – Size, in bytes, of the message to

** be sent.

** Outputs: UINT status – SUCCESS

\*****************************************************************/