User Manual User guide

Configuring the APS Import/Export Utility
2-3
Table 2.A
Specifying User Directories or Choosing between Color and
Monochrome Screens
If you want to: Press: Then:
specify the user directories
[F1] - DEFINE DIR
see the following section, Specifying the
User Directories.
choose between color or
monochrome displays
➀
[F3] - COLOR SELECT
toggle between COLOR and
MONOCHROME
➁
, then press [F9] -
SAVE CONFIG or
[ESC] after making
your choice.
save the configuration
permanently
[F9] - SAVE CONFIG
APSIE saves the configuration to the
user preference file.
➀
You must have a color adaptor card and color monitor to use the color selection.
➁
Indicates the user preference default.