Manual

DeviceNet Seminar Lab Exercises 63
Publication 1787.6.1 - August 1997
Notice in O:1.1, that bit 0 changes to a 0.
5. Rotate the selector switch clockwise until an amber 1 is illuminated on
the 1794-IB16.
Notice the voltmeter on the demo box swings continuously from 0 V to
10 V and back to 0 V.
6. In the Radix selection box, choose Hex/BCD.
You see this screen.
Notice that output word O:1.2 is the analog data that is being sent to
channel 0 of the 1794-OE4 card and ultimately to the voltmeter.
7. Close the Data File by clicking the button with an X in the upper right
corner of the Data File window.