Configuration Guide Manual

Chapter 2 Licensing
10 Rockwell Automation Publication H2H-IN001A-EN-E–July 2012
number shows how many licenses of the selected type will be
assigned to the server.
7. Click Apply.
After you have assigned the activation file to the server, a point
source FTSS has been created and set to unlimited. You can check it
in the Point Sources tab.
NOTE
You need to restart the server for the changes to take effect.
You can verify that the H2H Interface licenses has been properly
allocated in the System Management Tools.
To view the information on the allocated licenses:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Historian SE > System Management Tools.
2. Under Collectives and Servers, select the server for which you
want to view the license information.
3. Under System Management Tools, select Operation >
Licensing.
Verify the Allocated
Interface Licenses