Configuration Guide Manual

Chapter 3 Installing FactoryTalk Historian To Historian Interface
14 Rockwell Automation Publication H2H-IN001A-EN-E–July 2012
For more information on FactoryTalk, refer to FactoryTalk Help.
You can access it from Start > All Programs > Rockwell Software >
FactoryTalk Tools > FactoryTalk Help after you have installed
FactoryTalk Services Platform on your machine.
NOTE
Make sure to install FactoryTalk Services Platform on all the computers,
including the computer that will serve as the FactoryTalk Directory.
To install FactoryTalk Services Platform:
1. Unpack the distribution kit on your computer.
2. Double-click setup.exe. The installation wizard appears.
3. On the main page of the installation wizard, click Install
FactoryTalk Historian To Historian Interface > Install
FactoryTalk Historian To Historian Interface > Install
FactoryTalk Services Platform.
The system checks if you have all the required components
installed. If any components are missing, a dialog box appears
prompting you to install the missing components. Click
Install to install the components.
The installation wizard appears.
4. On the Welcome... page, click Next.
5. On the License Agreement page, read and accept the terms of
the license agreement, selecting the I accept... option.
Click Next.
6. On the Setup Type page, select Standard and click Next.
7. On the Ready to Install the Program page, click Install to
start the installation.
The Installing page appears with the status of the installation.
8. On the InstallShield Wizard Completed page, click Finish
to exit the wizard.