Hardware Ref, Installation, and Troubleshooting User guide

1Ć2
1.2 Assumptions About the Audience
This manual is intended for qualified electrical personnel. It is task Ćoriented and is organized
according to a logical progression of steps to be followed to install and troubleshoot the drive.
1.3 Taking Safety Precautions
Dangers, warnings, and cautions are used in this manual to point out potential problem areas. All
three types of precautions are enclosed in a box to call attention to them.
DANGER
A DANGER ALERTS A PERSON OF A CONDITION WHICH COULD RESULT IN SEVERE BODILY
INJURY OR LOS
S OF LIFE .
WARNING
A
W ARNING ALERTS A PERSON OF A CONDITION WHICH COULD RESUL T IN POTENTIAL B ODILY
INJURY IF PROCEDURES ARE NOT FOLLOWED.
CAUTION: A caution alerts a person of a condition which could result in damage to, or destruction of the
equipment.
1.4 Understanding Terms Used in this Manual
The following terms are defined according to the way they are used in this manual:
D GV3000 drives will typically be referenced by horsepower . If additional clarity is required, drive
model numbers will also be included.
D P
arameters will be referenced either as parameter (P .030) or Elapsed T ime Meter Reset (P .030).
1.5 If You Want to Know More
Refer to the following related publications as necessary for more information:
D D2Ć3339 GV3000 AĆC General Purpose (V/Hz) and V ector Duty Drive Software Start ĆUp and
Reference Manual
D D2Ć3291 Snubber Resistor Braking Kit
D D2Ć3305 Motor Encoder Cable Kit
D D2Ć3308 AutoMax Network Communication Board
D D2Ć3348 Control and Configuration Software (C S3000)
D D2Ć3341
Remote Meter Interface
D D2Ć3342 Operator Interface Module
1.6 Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction manual, contact
your local Reliance Electric sales office. F or technical assistance, call 1Ć800ĆRELIANCE .