Hardware Ref, Installation, and Troubleshooting User guide

7Ć12

Table 7.1 Ć W

iring Signal and Control I/O to the Terminal Strip (Continued)

Terminal

Number

Description Parameters/Wiring Connections

Wiring a Forward/Reverse Input

19 Digital

Input 6

(Default Ć F

orward/Reverse)

Digital input 6 is control function programmable through

parameter P

.007. The following parameters must be set:

P.000:

Control Source

P.006:

Second Menu P

assword

P.007: T

erminal Strip Digital Inputs Configure (Selects

and assigns a control function to digital inputs 6

to 8).

P.008: T

erminal Strip Speed Reference Source (Analog,

Motor Operated P

otentiometer (MOP), or

Preset Speeds)

P.027:

Reverse Disable

Note that based on the settings of parameters P

.000, P.007,

P.008, and r

.030 if an RMI board is used, the following

parameters can affect digital input 6.

.023: MOP Accel/Decel T

ime

.024: MOP Reset Configuration

P.031 to P.038: Preset Speeds 1Ć8

Refer to the GV3000 Programming instruction manual

(D2Ć3339) for additional information.

erminal 19 On = Reverse Direction

Diagram shows factory setting. F

rom the pulse tachometer

end of the motor

, clockwise rotation indicates forward mo

tor movement.