User Manual

2-18
GV3000/SE AC Drive Hardware Reference, Version 6.06
2.8.3 RS-232 Communication Port
The Regulator board contains a 9-pin D-shell RS-232 communication port (J8). This
port provides RS-232 communication between the GV3000/SE drive and a personal
computer running the Control and Configuration (CS3000) software. See figures 2.9,
2.10, and 2.11. Refer to instruction manual D2-3348 for more information about the
CS3000 software.
Figure 2.14 – Typical Terminal Strip Connections
WIRES BETWEEN TERMINALS 16+16A AND
20 + 20A ARE NECESSARY FOR PROPER
OPERATION OF THE FUNCTION LOSS
INPUT. THEY SHOULD NOT BE REMOVED.
ENCODER
CONNECTIONS
PHASE B NOT
DIGITAL INPUT 8 (REMOTE/LOCAL) DIGITAL INPUT 7 (RAMP1/RAMP2) DIGITAL INPUT 6 (FORWARD/REVERSE)
FACTORY
INSTALLED