User Manual

Wiring the Regulator Board Terminal Strip

7-11

Table 7.8 - Wiring Signal and Control I/O to the Terminal Strip (Continued)

Terminal

Number Description Parameters/Wiring Connections

Wiring Analog Speed Reference Inputs

Isolated Reference

Voltage (+10VDC)

Analog Speed/Torque

Reference Input Voltage

(+/- 10VDC)

Analog Speed/Torque

Reference Input Current

(0-20mA)

Isolated Speed/Torque

Reference Common

(Voltage/Current)

Related parameters:

•

P.000: Control Source

•

P.009: Terminal Strip Analog Input Offset

•

P.010: Terminal Strip Analog Input Gain

•

P.011: Terminal Strip Analog Input Configure

Refer to the GV3000/SE Software Start-Up and Reference

manual for additional parameter information.

Jumper J4 must also be set. See figure 2.12.

Refer to Appendix G in the GV3000/SE Software Start-Up

and Reference manual (D2-3359) for more information about

the analog input.