Manual

12 Rockwell Automation Publication LIQFLO-UM011B-EN-P - November 2012
Using the 20-HIM-A6 HIM with the LiquiFlo 2.0 AC Drive
Customizing the Process
Display Screen
Selecting Multi-Line or Single-Line View
By default, the Process Display screen shows a multi-line view of the drive process
variables shown below.
Figure 11 - Multi-Line View Process Display Screen
1. Press the ESC ‘soft key’ until the Process Display screen appears.
2. To change the multi-line view Process Display screen to show each of the
process variables in a larger single-line view, press the VIEW ‘soft key’.
3. Use the or key to scroll to each single-line view Process
Display screen.
Figure 12 - Single-Line View Process Screen Examples
4. To return to the multi-line view Process Display screen, press the VIEW
‘soft key’ again.
Changing Displayed Items, Adding a Scale Factor or Customizing Text
You can further customize the Process Display screen by doing the following:
• Changing a displayed parameter to a different parameter.
• Applying a scale factor to the displayed parameter.
• Customizing text for the displayed parameter.
To do any or all of the above, perform the following steps.
1. With either the multi-line view process display screen (Figure 11
) or the
single-line view process display screen (Figure 12
) displayed, use the
or key to select the process variable you want to change.
2. Press the EDIT ‘soft key’.
0.00
0.000
Stopped
0.00 Hz
AUTO
F
ESC VIEW REF PAR#
Amps
Bus VDC
EDIT
Displayed (Default) Process Variables
Screen Text Description
Amps Output Amps
Bus DC DC Bus Volts
0.00
Stopped
0.00 Hz
AUTO
F
ESC VIEW REF PAR#
Amps
0.000
Stopped
0.00 Hz
AUTO
F
ESC VIEW REF PAR#
Bus VDC
EDIT EDIT