MD60 / MD65 OIM Quick Reference Model Numbers MD1CC, MD4LCD-PNL, and MD4ALCD Instruction Manual D2-3508-2 DISP DISP LANG LANG ESC Esc PROG Sel SEL 77 88 99 44 55 66 11 22 33 ..
Display Descriptions F Stopped F Stopped Auto Hz A V Parameters Groups Linear List Changed Params Auto Hz A V DIAG F PARAM DSEL MEM At Reference Output Freq DISP DISP SEL Auto LANG LANG ESC Esc PROG Sel SEL 77 88 99 44 55 66 11 22 33 ..
Key Descriptions Table 1 – Key Descriptions Key Description Exit a menu, cancel a change to a parameter value, or acknowledge a fault or alarm. ESC Esc PROG Select a digit, select a bit, or select a menu tab. SEL Scroll through options, increase a value, or toggle a bit. Used to increase Speed Reference on MD1CC Process Display screen.1 Scroll through options, decrease a value, or toggle a bit. Used to decrease Speed Reference on MD1CC Process Display screen.
Menu Navigation Tabs Table 2 – Menu Navigation Tabs Tabs Description DIAG The Diagnostics tab is used for displaying faults, the device (drive or peripheral) status and version. PARAM The Parameter tab is used for parameter editing. Parameters can be displayed in groups, in a linear list, or only those changed from their defaults. DSEL The Device Select tab is used to select the device (drive or peripheral) the OIM is to access.
Table 3 – OIM Parameter List No. Name and Description Details 006 (Large Disp Param) - Selects the parameter to display on the Large Format User Display screen. For example, setting to 1 selects parameter D001 (Output Freq) on an MD60 drive. Setting to 0 enables the Scaled Reference to be displayed. Default: Minimum: Maximum: Type: 1 0 65535 Read/Write 007 (LCD Contrast) - Sets the LCD contrast level.
Table 3 – OIM Parameter List No. 015 016 017 018 019 020 021 022 Name and Description Details (Ref Units Char 1) (Ref Units Char 2) (Ref Units Char 3) (Ref Units Char 4) (Ref Units Char 5) (Ref Units Char 6) (Ref Units Char 7) (Ref Units Char 8) Selects the 8 characters to use for the Feedback units on the Process Display using the ISO 8859-1 character set. These parameters can also be configured using the “Edit Ref Text” selection in the OIM Setup tab.
U.S. Drives Technical Support Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: support@drives.ra.rockwell.com, Online: www.ab.com/support/abdrives Trademarks not belonging to Rockwell Automation are property of their respective companies. Publication D2-3508-2– March 2004 Copyright © 2004 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
