User guide

9-12 EtherNet/IP Communications Module
10 Slave Detected The module detected that the slave has been
connected.
11 Slave Removed The module detected that the slave has been
disconnected.
12 Slave Logon The module has established communications
with the drive.
13 Slave Timeout The module has lost communications with the
drive.
14 Slave Brand Flt The slave brand is different than the module.
15 Host 0 Logon The module has established communications
with host 0.
16 Host 1 Logon The module has established communications
with host 1.
17 Host 2 Logon The module has established communications
with host 2.
18 Host 3 Logon The module has established communications
with host 3.
19 Host 4 Logon The module has established communications
with host 4.
20 Host 0 Timeout The module has lost communications with host 0.
21 Host 1 Timeout The module has lost communications with host 1.
22 Host 2 Timeout The module has lost communications with host 2.
23 Host 3 Timeout The module has lost communications with host 3.
24 Host 4 Timeout The module has lost communications with host 4.
25 Host 0 Brand Flt The host 0 brand is different from the module.
26 Host 1 Brand Flt The host 1 brand is different from the module.
27 Host 2 Brand Flt The host 2 brand is different from the module.
28 Host 3 Brand Flt The host 3 brand is different from the module.
29 Host 4 Brand Flt The host 4 brand is different from the module.
30-39 Reserved
Network Events
40 EN Link Up The network link is established.
41 EN Link Down The network link is lost.
42 Dup IP Addr The module detected that another device is using
its network address. In this case, the module will
not participate in any network activity.
43 EN Open An I/O connection from the network to the
module was opened.
44 EN Close An I/O connection from the network to the
module was closed.
45 EN Timeout An I/O connection from the network to the
module has timed out.
Table 9.7 – Event Codes and Descriptions
Code Event Description