User guide

Module Parameters B-3
Sets the bytes of the subnet mask.
To set the subnet mask using these parameters, parameter 02
(BOOTP) must be set to Disabled.
Sets the bytes of the gateway address.
Important: To set the gateway address using these parameters,
parameter 3 (BOOTP) must be set to Disabled.
07
08
09
10
Subnet Cfg 1
Subnet Cfg 2
Subnet Cfg 3
Subnet Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Ye s
255 . 255 . 255 . 255
Subnet Cfg 1
Subnet Cfg 2
Subnet Cfg 3
Subnet Cfg 4
11
12
13
14
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Ye s
255 . 255 . 255 . 255
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4