User guide

B-4 EtherNet/IP Communications Module
Configures the network data rate and duplex mode at which the
module communicates.
Displays the actual network data rate and duplex mode used by the
module.
15 EN Rate Cfg
Range: 0 = Autodetect
1 = 10 Mbps Full
2 = 10 Mbps Half
3 = 100 Mbps Full
4 = 100 Mbps Half
Default: 0 = Autodetect
Type: Read/Write
Reset Required: Ye s
16 EN Rate Act
Range: 0 = No Link
1 = 10 Mbps Full
2 = 10 Mbps Half
3 = 100 Mbps Full
4 = 100 Mbps Half
Default: 0 = No Link
Type: Read Only
Reset Required: N/A