User guide

Index Index-1
INDEX
A
assembly object, C-4
assistance, technical
, 1-2
B
BOOTP (2), B-2
BOOTP (Bootstrap Protocol)
configuring the module using
, 4-3
disabling
, 4-6
bridge, configuring
, 5-1 to 5-9
C
checklist, installation, 2-3
Comm Flt Action (18)
, B-5
commissioning the module
, 3-6
communications specifications
, A-1
configuration tools
, 4-1
configuring the module
, 4-1 to 4-12
configuring the scanner or bridge
, 5-1 to
5-9
connecting the module to the drive
, 3-3
connecting the module to the
network
, 3-5
connector
Ethernet
, 2-1
MDI
, 2-1
ControlLogix I/O image
, 6-2
D
data rate, setting, 4-8
Datalinks, using
, 6-3
dimensions, module
, A-1
downloading the I/O configuration
, 5-9
DPI ports
, 3-4
DRIVE status indicator
, 8-2
Drv 0 Addr (24)
, B-8
Drv 1 Addr (25)
, B-8
Drv 2 Addr (26)
, B-8
Drv 3 Addr (27)
, B-8
Drv 4 Addr (28)
, B-8
E
EN Rate Act (16), B-4
EN Rate Cfg (15)
, B-4
equipment required for installation
, 2-2
Ethernet connector
, 2-1
Ethernet link object
, C-33
events
codes and descriptions
, 8-11
viewing and clearing
, 8-11
example
Explicit Messages
, 7-5
Get Attribute Single message
, 7-6
ladder logic program
, 6-3 to 6-7
network configuration
, 5-1 to 5-9
Set Attribute Single message
, 7-8
Explicit Message examples
, 7-5
explicit messaging, using
, 7-1
F
fault configuration parameters,
setting
, 4-10
Flt Cfg Logic (20)
, B-6
Flt Cfg Ref (21)
, B-7
G
gateway address
setting using BOOTP
, 4-3
setting using parameters
, 4-7
Gateway Cfg 1 (11)
, B-3
Gateway Cfg 2 (12)
, B-3
Gateway Cfg 3 (13)
, B-3
Gateway Cfg 4 (14)
, B-3
Get Attribute Single message
example
, 7-6
I
I/O configuration
adding a bridge or scanner
, 5-2
adding the module and drive
, 5-4
saving
, 5-4, 5-9
I/O configuration, setting
, 4-8